fbpx

TELOS 590 NEXTGEN II

Integrated Stereo Amplifier
Winner of the 6moons.com 2017 Blue Moon Award, the Telos 590 NextGen II is a newly designed integrated amplifier benefitting from the latest development of Goldmund amplification technology.
OUTPUT POWER
  • Maximum power (IEC60065): 2 x 215 Wrms on 8 Ω / 1 % THD.
DAMPING FACTOR
  • 600 at 1 kHz / 8 Ω.
OUTPUT FLOOR NOISE
  • Analog input terminated with RCA Shorting Caps, unloaded: < 10 μV from 20 Hz to 20 kHz.
GAIN
  • 35 dB.
DISTORTION
  • IMD (SMPTE), unloaded: < 0.02 %.
  • THD+N, unloaded: < 0.08 % from 20 Hz to 20 kHz at 30 Vrms output.
REAR PANEL
  • 2 x output binding posts (left & right).
  • On/Off power switch key.
  • Voltage input selector.
  • RS232 Command connector.
  • 1 x USB device: Audio Class 2.0 (no driver required on Mac OS X as of v.10.6.4 nor on Linux, driver required only for Windows, contact your Goldmund representative):
    – Sample rate up to 384 kHz/Bit depth up to 32.
    – DSD64, DSD128 over PCM capabilities.
  • 1 x Toslink Optical.
  • 1 x Digital S/PDIF coaxial RCA 75 Ohms.
  • 5 x Analog RCA (left & right).
INPUT
Max level before clipping:
  • Analog input: 1 Vrms.
  • Digital input: -6 dBFS.
OUTPUT
Max level before clipping:
  • 1 % THD, unloaded: 170 Vpp.
DYNAMIC RANGE
  • 22 kHz measurement bandwidth (flat), true RMS unloaded: 100 dB.
POWER SUPPLY
  • Nominal line voltage: 115 V or 230 V.
  • Input voltage range: +/- 15 %.
RATED POWER CONSUMPTION
  • IEC 60065, 1/8 Output Power at 8 Ω: 250 W.
DIMENSIONS & WEIGHT
  • 44 W x 41.5 D x 16.5 H (cm).
  • 20 kg.
WARRANTY
  • 3 years parts and labor.
WHERE TO BUY
Find a distributor

INTEGRATED AMPLIFIERS

This website uses cookies to ensure you get the best experience on our website.

This website uses cookies to ensure you get the best experience on our website.